Attributes
| Family Id | pentair-hydromatic-skhd150-high-head-effluent-pump-1-1-2-hp-cast-iron-2-npt-discharge-3-4-solids-handling |
|---|---|
| Brand | Hydromatic |
| Part Numbers | SKDH150 |
| Business Units | IFT – Commercial and Infrastructure Flow,IFT – Residential and Irrigation Flow |
| Applications | Effluent Pumps, Consumer Water Disposal Pumps |
| Discontinued | 1 |
Description
Generates high heads for bigger drain fields.
## KEY FEATURES
- Two (2) Carbon/Ceramic Type 21 Mechanical Seals Mounted in Tandem
- Oil-Filled Motor with Automatic Reset Thermal Overload for Maximum Protection (single-phase models)
- Upper & Lower Ball Bearing Construction
- Piggyback Plug Available for Easy Maintenance and Switch Replacement
- Optional Seal Failure Probe Warns of Seal Leak
- Capacitor Start for Increased Starting Torque (single-phase models)
### WARRANTY
12 months from date of purchase or 18 months from date of manufacture, whichever comes first.
Variations (1)
SKDH150
| Horsepower | 1-1/2 |
|---|
Specifications
| BODY CONSTRUCTION | Class 30 Cast Iron |
|---|---|
| HORSEPOWER | 1-1/2 HP |
| MAXIMUM HEAD | 127' |
| MAXIMUM CAPACITY | 55 GPM (3.5 LPS) |
| FLOW at 10' LIFT | 55 GPM (3.5 LPS) |
| SWITCH TYPE | standard is no switch. Optional wide-angle tethered Float Available for 1-Phase Models |
| MINIMUM SUMP DIAMETER | Simplex: 24" / Duplex: 36" |
| DISCHARGE PIPE SIZE | 1-1/2" NPT |
| MAXIMUM SOLIDS HANDLING SIZE | 3/4" |
| AMP DRAW (full load) | 6.1 amps on 208v, 3phase / 12 amps on 230v, 1phase / 6 amps on 230v, 3phase / 2.5 amps on 460v / 2 amps on 575v |
| CORD LENGTH | 20' STW-A |
| VOLTAGE | 230v 1-phase OR 208v, 230v, 460v, or 560v 3-phase, 60 Hz |
| MAXIMUM LIQUID TEMPERATURE | 140°F (60°C) |
| IMPELLER CONSTRUCTION | Thermoplastic semi-open |
| Horsepower | 1-1/2 |
| Brand | Hydromatic |