Attributes
| Family Id | Series_SJH |
|---|---|
| Brand | Berkeley |
| Part Numbers | 17858 |
| Business Units | IFT – Residential and Irrigation Flow |
| Applications | Well Pumps, Consumer Water Supply Pumps, Jet Pumps |
| Discontinued | 0 |
Description
ClearJet models provide excellent performance with good pressure for wells to 25' deep. Self-priming after the priming chamber has been filled with water.
- **Stainless Steel Pump Body** Provides Maximum Resistance To Corrosion
- **Built-In Jet** Made of High Strength Thermoplastic Components
- **Mechanical Shaft Seal** with Highly Polished Carbon-Ceramic Faces and Stainless Steel Components
- **Superior Insulation Materials** Protect Motor Windings Against Excessive Moisture and Contaminants
- **Dynamically Balanced Rotor** is Die Cast Under High Pressure For Uniform Performance and Greater Efficiency
- **Heavy-Duty Ball Bearings:** Shielded, Permanently Lubricated Bearings, Extensively Tested To Ensure Extended Life and Smooth, Quiet Operation
- **Stainless Steel Pump and Motor Shaft** Provides Maximum Corrosion Resistance; One-Piece Threaded Shaft for Positive Impeller Drive and Alignment
- **Dustproof Motor Cover** Protects All Electrical Components From Dirt, Dust, and Insects. Ventilating Air Cannot Contaminate Vital Switching Components
- **Quality Pressure Switch** with Fixed 20 PSI Differential
Variations (1)
17858
| Horsepower | Available in 3/4 or 1 HP |
|---|---|
| Voltage | 115v / 230v, 60 Hz |
| MAXIMUM LIQUID TEMP | 122 degrees F (50 degrees C) |
| MAX INLET PRESSURE | 50 PSI |
| AVERAGE PRIMING TIME AT 20 FEET | 3/4 HP: 4.2 minutes / 1 HP: 4.2 minutes |
| BODY | 304 Stainless Steel |
| JET ASSEMBLY DIFFUSER IMPELLER | NORYL (R) |
| Shaft | One-Piece Threaded, 416 Stainless Steel |
| BASE | Polypropylene |
Specifications
| Heavy-Duty Ball Bearings | Shielded, Permanently Lubricated Bearings, Extensively Tested To Ensure Extended Life and Smooth, Quiet Operation |
|---|---|
| AVERAGE PRIMING TIME AT 20 FEET | 3/4 HP: 4.2 minutes / 1 HP: 4.2 minutes |
| BASE | Polypropylene |
| BODY | 304 Stainless Steel |
| Horsepower | Available in 3/4 or 1 HP |
| JET ASSEMBLY DIFFUSER IMPELLER | NORYL (R) |
| MAX INLET PRESSURE | 50 PSI |
| MAXIMUM LIQUID TEMP | 122 degrees F (50 degrees C) |
| Shaft | One-Piece Threaded, 416 Stainless Steel |
| Voltage | 115v / 230v, 60 Hz |
| Brand | Berkeley |