Attributes
| Family Id | pentair-sta-rite-pl-series-convertible-deep-well-jet-pump-thermoplastic-1-2-thru-1-1-2-hp-115v-230v-1-1-4-suction-1-drive-1-discharge |
|---|---|
| Brand | Sta-Rite |
| Part Numbers | PLC, PLD, PLE, PLF |
| Business Units | IFT – Commercial and Infrastructure Flow,IFT – Residential and Irrigation Flow,IFT – Industrial Filtration,IFT – Food and Beverage |
| Applications | Well Pumps, Consumer Water Supply Pumps |
| Discontinued | 0 |
Description
The performance-proven PL Series is constructed to be lightweight and extremely resistant to sand and abrasive wear, it performs best on all deep well installations.
## Key Features
- **Superior Rustproof Construction** - Pump body is Dura-Glas fiberglass reinforced thermoplastic - lightweight, rustproof and exceptionally strong. All components in contact with water are resistant to the corrosive and abrasive forces found in the most aggressive water conditions.
- **Heavy-duty Motor** - Dustproof canopy completely encloses electrical components and provides dust, dirt and insect protection. Ventilating air cannot contaminate vital switching components. Permanently lubricated, heavy-duty ball bearings ensure smooth, quiet operation and extended motor life.
- **Precision Diffuser** - Multi-port, reinforced polypropylene design primes faster and handles more air.
- **Precision Molded Impeller** - Precision molded Noryl® gives perfect balance and ultra-smoothness for highest performance and efficiency.
### Warranty
1 year limited warranty
Variations (4)
PLC
| Horsepower | 1/2 |
|---|
PLD
| Horsepower | 3/4 |
|---|
PLE
| Horsepower | 1 |
|---|
PLF
| Horsepower | 1-1/2 |
|---|
Specifications
| BODY CONSTRUCTION | Thermoplastic |
|---|---|
| MAXIMUM CAPACITY | 26.3 GPM (Model PLE with Shallow Well Setup) |
| FLOW at 10' LIFT and 40 PSI | 13.8 GPM (Model PLD Shallow Well Setup) |
| MAX LIFT | 25' w/ Shallow Well jet Kit / 60' w/ Deep Well Jet Kit |
| MAX SHUT-OFF PRESSURE | 72 PSI (model PLC in shallow well config) |
| MAXIMUM TOTAL PRESSURE (Inlet + Pump Pressure) | PLC: 72 PSI / PLD:62 PSI / PLE: 62 PSI / PLF: 64 PSI |
| PRESSURE SWITCH SETTING | 30-50 PSI |
| SUCTION SIZE | 1-1/4" NPR |
| DRIVE SIZE | 1" NPT (suction-over-drive) |
| DISCHARGE SIZE | 1" NPT |
| AMP DRAW (full load) | 6.1 amps on 230v / 12.2 amps on 115v |
| VOLTAGE | 115v/230v AC, 60 Hz, 1-phase |
| MAXIMUM LIQUID TEMPERATURE | 140 F (60 C) |
| Brand | Sta-Rite |