Attributes
| Family Id | pentair-hydromatic-skv-series-4-10-1-2-hp-cast-iron-sewage-pumps |
|---|---|
| Brand | Hydromatic |
| Business Units | IFT – Commercial and Infrastructure Flow,IFT – Residential and Irrigation Flow |
| Applications | Sewage Pumps, Consumer Water Disposal Pumps |
| Discontinued | 0 |
Description
Recessed vortex impeller allows pumping of stringy material and reduces clogging.
## Key Features
- Carbon/Ceramic Type 21 Mechanical Shaft Seal
- Oil-Filled Motor with Automatic Reset Thermal Overload Protection
- Lower Single-Row Ball Bearing Construction
- Piggyback Plug Available for Easy Maintenance and Switch Replacement
**The model SKV50 pump features our new, improved D1 Diaphragm Switch.**
### Warranty
36 month limited warranty
Specifications
| BODY CONSTRUCTION | Class 30 Cast iron |
|---|---|
| HORSEPOWER | Available in 4/10 or 1/2 HP |
| MAXIMUM HEAD | 22' |
| MAXIMUM CAPACITY | 80 GPM |
| FLOW at 10' LIFT | 80 GPM (Use with less than 10' of head not recommended) |
| SWITCH TYPE | Wide-Angle Tethered Float or Diaphragm Pressure Switch |
| MINIMUM SUMP DIAMETER | Simplex: 18" / Duplex: 30" |
| DISCHARGE PIPE SIZE | 2" NPT |
| MAXIMUM SOLIDS HANDLING SIZE | 2" |
| AMP DRAW (full load) | SKV40: 12.6 amps on 115v / 6.4 amps on 230v / SKV50: 12 amps on 115v / 6 amps on 230v |
| CORD LENGTH | 10' SJTW (20' optional) |
| VOLTAGE | available in 115v or 230v AC, 60 Hz |
| MAXIMUM LIQUID TEMPERATURE | 140 F (60 C) |
| MOTOR | 4/10 or 1/2 HP PSC with Thermal Overload Protection |
| IMPELLER CONSTRUCTION | Thermoplastic Recessed |
| Brand | Hydromatic |
PDF Documents
Hydromatic SKV40 Submersible Sewage Ejector Pump Manual
Open PDF
Hydromatic SKV50 Submersible Sewage Ejector Pump Manual
Open PDF
Hydromatic SKV40 Submersible Sewage Ejector Performance Data Sheet
Open PDF
Hydromatic SKV50 Sewage Ejector Data Sheet
Open PDF
Hydromatic SKV40 Submersible Sewage Ejector Pump Brochure
Open PDF
Hydromatic SKV50 Submersible Sewage Ejector Pump Spec Sheet
Open PDF