Attributes
| Family Id | pentair-hydromatic-hp33-hp50-1-3-1-2-hp-cast-iron-sump-pumps |
|---|---|
| Brand | Hydromatic |
| Part Numbers | HP33, HP50 |
| Business Units | IFT – Commercial and Infrastructure Flow,IFT – Residential and Irrigation Flow |
| Applications | Sump Pumps, Consumer Water Disposal Pumps, Flood Protection and Remediation |
| Discontinued | 0 |
Description
Ideal for applications with small diameter sump pits.
## KEY FEATURES
- 2-pole Switch Design Permits Easier Fit in Sump Pits As Narrow As 10" Diameter
- Oil-Filled Motor for Maximum Heat Dissipation
- Carbon-Ceramic Seal Protects Motor Against Water Leakage
- Lubricated Ball Bearings and Shaft Seal for Longer Service Life
- Easily Field-Serviceable
- Anti-Airlock Hole in Base Saves Labor
- Thermally-Protected Shaded Pole Motor with No Starting Switch or Relay
### WARRANTY
3 year limited warranty
Variations (2)
HP33
| Capacities | 48 gpm (182 lpm) |
|---|
HP50
| Capacities | 62 gpm (235 lpm) |
|---|
Specifications
| BODY CONSTRUCTION | Cast Iron |
|---|---|
| HORSEPOWER | Available in 1/3 or 1/2 HP |
| MAXIMUM HEAD | 24' |
| MAXIMUM CAPACITY | HP50: 62 GPM / HP33: 48 GPM |
| FLOW at 10' LIFT | HP50: 52 GPM / HP33: 40 GPM |
| SWITCH TYPE | 2-pole float switch |
| MINIMUM SUMP DIAMETER | 10" (25.4 cm) |
| DISCHARGE PIPE SIZE | 1-1/2" NPT |
| MAXIMUM SOLIDS HANDLING SIZE | 1/2" (12.7 mm) |
| AMP DRAW (full load) | HP50: 12 Amps / HP33: 9.8 Amps |
| CORD LENGTH | 10' or 20' |
| VOLTAGE | 115V, 60 Hz |
| MAXIMIMUM WATER TEMPERATURE | 130°F (54°C) |
| MOTOR | 115 v / 9.8 full-load amps |
| Brand | Hydromatic |