Attributes
| Family Id | 3 inch Solids Handling - 3V/VX |
|---|---|
| Brand | Myers |
| Part Numbers | 3V10M4-21, 3V10M4-03, 3V10M4-23, 3V10M4-43, 3V10M4-53, 3V15M4-21, 3V15M4-03, 3V15M4-23, 3V15M4-43, 3V15M4-53, 3V20M4-21, 3V20M4-03, 3V20M4-23, 3V20M4-43, 3V20M4-53, 3V30M4-21, 3V30M4-03, 3V30M4-23, 3V30M4-43, 3V30M4-53, 3V50M4-21, 3V50M4-03, 3V50M4-23, 3V50M4-43, 3V50M4-53 |
| Business Units | IFT – Commercial and Infrastructure Flow,IFT – Residential and Irrigation Flow |
| Applications | Submersible Solids Handling Pumps |
| Discontinued | 0 |
Description
The Pentair Myers 3V series pump is for use in municipal lift stations, treatment plants and industrial waste applications. Provides smooth operation over an extended portion of the performance curve. Available for ordinary and hazardous locations.
- Flows up to 400 gpm
- Heads up to 48'
- Speed 1750 RPM
- 3" discharge
- 2-1/2" solids capacity
Variations (25)
3V10M4-21
| Hazardous Location | 3VX10M4-21 |
|---|---|
| Voltage | 230 |
| Phase | 1 |
| Hertz | 60 |
| Start Amps | 55 |
| Amps (Max) | 8 |
| Service Factor Amps | 10 |
| Full Load kW | 1.4 |
| Start KVA | 12.7 |
| Full Load KVA | 1.8 |
| NEC Code Letter | P |
| Service Factor | 1.2 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V10M4-03
| Hazardous Location | 3VX10M4-03 |
|---|---|
| Voltage | 208 |
| Phase | 3 |
| Hertz | 60 |
| Start Amps | 47 |
| Amps (Max) | 5.4 |
| Service Factor Amps | 6.2 |
| Full Load kW | 1.5 |
| Start KVA | 16.9 |
| Full Load KVA | 1.9 |
| NEC Code Letter | S |
| Service Factor | 1.2 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V10M4-23
| Hazardous Location | 3VX10M4-23 |
|---|---|
| Voltage | 230 |
| Phase | 1 |
| Hertz | 60 |
| Start Amps | 43 |
| Amps (Max) | 4.5 |
| Service Factor Amps | 5.4 |
| Full Load kW | 1.5 |
| Start KVA | 17.1 |
| Full Load KVA | 1.8 |
| NEC Code Letter | S |
| Service Factor | 1.2 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V10M4-43
| Hazardous Location | 3VX10M4-43 |
|---|---|
| Voltage | 460 |
| Phase | 3 |
| Hertz | 60 |
| Start Amps | 21 |
| Amps (Max) | 2.3 |
| Service Factor Amps | 2.7 |
| Full Load kW | 1.5 |
| Start KVA | 16.7 |
| Full Load KVA | 1.8 |
| NEC Code Letter | S |
| Service Factor | 1.2 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V10M4-53
| Hazardous Location | 3VX10M4-53 |
|---|---|
| Voltage | 575 |
| Phase | 3 |
| Hertz | 60 |
| Start Amps | 14 |
| Amps (Max) | 1.8 |
| Service Factor Amps | 2.2 |
| Full Load kW | 1.5 |
| Start KVA | 13.9 |
| Full Load KVA | 1.8 |
| NEC Code Letter | P |
| Service Factor | 1.2 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V15M4-21
| Hazardous Location | 3VX15M4-21 |
|---|---|
| Voltage | 230 |
| Phase | 1 |
| Hertz | 60 |
| Start Amps | 55 |
| Amps (Max) | 10 |
| Service Factor Amps | 12 |
| Full Load kW | 2 |
| Start KVA | 12 |
| Full Load KVA | 2 |
| NEC Code Letter | M |
| Service Factor | 1.2 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V15M4-03
| Hazardous Location | 3VX15M4-03 |
|---|---|
| Voltage | 208 |
| Phase | 3 |
| Hertz | 60 |
| Start Amps | 47 |
| Amps (Max) | 6.6 |
| Service Factor Amps | 8 |
| Full Load kW | 2 |
| Start KVA | 16.9 |
| Full Load KVA | 2.4 |
| NEC Code Letter | N |
| Service Factor | 1.2 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V15M4-23
| Hazardous Location | 3VX15M4-23 |
|---|---|
| Voltage | 230 |
| Phase | 3 |
| Hertz | 60 |
| Start Amps | 43 |
| Amps (Max) | 5.5 |
| Service Factor Amps | 7 |
| Full Load kW | 1.9 |
| Start KVA | 17.1 |
| Full Load KVA | 2.2 |
| NEC Code Letter | R |
| Service Factor | 1.2 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V15M4-43
| Hazardous Location | 3VX15M4-43 |
|---|---|
| Voltage | 460 |
| Phase | 3 |
| Hertz | 60 |
| Start Amps | 21 |
| Amps (Max) | 2.8 |
| Service Factor Amps | 3.5 |
| Full Load kW | 1.9 |
| Start KVA | 16.7 |
| Full Load KVA | 2.2 |
| NEC Code Letter | R |
| Service Factor | 1.2 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V15M4-53
| Hazardous Location | 3VX15M4-53 |
|---|---|
| Voltage | 575 |
| Phase | 3 |
| Hertz | 60 |
| Start Amps | 14 |
| Amps (Max) | 2.2 |
| Service Factor Amps | 2.8 |
| Full Load kW | 2 |
| Start KVA | 13.9 |
| Full Load KVA | 2.2 |
| NEC Code Letter | N |
| Service Factor | 1.2 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V20M4-21
| Hazardous Location | 3VX20M4-21 |
|---|---|
| Voltage | 230 |
| Phase | 1 |
| Hertz | 60 |
| Start Amps | 72 |
| Amps (Max) | 12 |
| Service Factor Amps | 14.4 |
| Full Load kW | 2.5 |
| Start KVA | 16.6 |
| Full Load KVA | 2.8 |
| NEC Code Letter | K |
| Service Factor | 1.2 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V20M4-03
| Hazardous Location | 3VX20M4-03 |
|---|---|
| Voltage | 208 |
| Phase | 3 |
| Hertz | 60 |
| Start Amps | 51 |
| Amps (Max) | 8.4 |
| Service Factor Amps | 9.8 |
| Full Load kW | 2.9 |
| Start KVA | 18.4 |
| Full Load KVA | 3 |
| NEC Code Letter | L |
| Service Factor | 1.2 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V20M4-23
| Hazardous Location | 3VX20M4-23 |
|---|---|
| Voltage | 230 |
| Phase | 3 |
| Hertz | 60 |
| Start Amps | 54 |
| Amps (Max) | 7 |
| Service Factor Amps | 8.6 |
| Full Load kW | 2.5 |
| Start KVA | 21.5 |
| Full Load KVA | 2.8 |
| NEC Code Letter | M |
| Service Factor | 1.2 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V20M4-43
| Hazardous Location | 3VX20M4-43 |
|---|---|
| Voltage | 460 |
| Phase | 3 |
| Hertz | 60 |
| Start Amps | 27 |
| Amps (Max) | 3.5 |
| Service Factor Amps | 4.6 |
| Full Load kW | 2.5 |
| Start KVA | 21.5 |
| Full Load KVA | 2.8 |
| NEC Code Letter | M |
| Service Factor | 1.2 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V20M4-53
| Hazardous Location | 3VX20M4-53 |
|---|---|
| Voltage | 575 |
| Phase | 3 |
| Hertz | 60 |
| Start Amps | 18 |
| Amps (Max) | 2.8 |
| Service Factor Amps | 3.4 |
| Full Load kW | 2.6 |
| Start KVA | 17.9 |
| Full Load KVA | 2.8 |
| NEC Code Letter | K |
| Service Factor | 1.2 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V30M4-21
| Hazardous Location | 3VX30M4-21 |
|---|---|
| Voltage | 230 |
| Phase | 1 |
| Hertz | 60 |
| Start Amps | 106 |
| Amps (Max) | 21 |
| Service Factor Amps | 26 |
| Full Load kW | 4.5 |
| Start KVA | 24.4 |
| Full Load KVA | 4.8 |
| NEC Code Letter | K |
| Service Factor | 1.2 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V30M4-03
| Hazardous Location | 3VX30M4-03 |
|---|---|
| Voltage | 208 |
| Phase | 3 |
| Hertz | 60 |
| Start Amps | 86 |
| Amps (Max) | 15 |
| Service Factor Amps | 18 |
| Full Load kW | 5 |
| Start KVA | 30.9 |
| Full Load KVA | 5.4 |
| NEC Code Letter | M |
| Service Factor | 1.2 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V30M4-23
| Hazardous Location | 3VX30M4-23 |
|---|---|
| Voltage | 230 |
| Phase | 3 |
| Hertz | 60 |
| Start Amps | 52 |
| Amps (Max) | 12 |
| Service Factor Amps | 15.6 |
| Full Load kW | 4.6 |
| Start KVA | 20.7 |
| Full Load KVA | 4.8 |
| NEC Code Letter | H |
| Service Factor | 1.2 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V30M4-43
No variation attributes.
3V30M4-53
| Hazardous Location | 3VX30M4-53 |
|---|---|
| Voltage | 575 |
| Phase | 3 |
| Hertz | 60 |
| Start Amps | 25 |
| Amps (Max) | 5 |
| Service Factor Amps | 6 |
| Full Load kW | 4.6 |
| Start KVA | 25.1 |
| Full Load KVA | 5 |
| NEC Code Letter | K |
| Service Factor | 1.2 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V50M4-21
| Hazardous Location | 3VX50M4-21 |
|---|---|
| Voltage | 230 |
| Phase | 1 |
| Hertz | 60 |
| Start Amps | 153 |
| Amps (Max) | 34 |
| Service Factor Amps | 34 |
| Full Load kW | 6.7 |
| Start KVA | 35.2 |
| Full Load KVA | 7.8 |
| NEC Code Letter | H |
| Service Factor | 1 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V50M4-03
| Hazardous Location | 3VX50M4-03 |
|---|---|
| Voltage | 208 |
| Phase | 3 |
| Hertz | 60 |
| Start Amps | 140 |
| Amps (Max) | 24 |
| Service Factor Amps | 24 |
| Full Load kW | 8 |
| Start KVA | 50.4 |
| Full Load KVA | 8.6 |
| NEC Code Letter | M |
| Service Factor | 1 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V50M4-23
| Hazardous Location | 3VX50M4-23 |
|---|---|
| Voltage | 230 |
| Phase | 3 |
| Hertz | 60 |
| Start Amps | 125 |
| Amps (Max) | 21 |
| Service Factor Amps | 21 |
| Full Load kW | 7.6 |
| Start KVA | 49.7 |
| Full Load KVA | 8.4 |
| NEC Code Letter | L |
| Service Factor | 1 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V50M4-43
| Hazardous Location | 3VX50M4-43 |
|---|---|
| Voltage | 460 |
| Phase | 3 |
| Hertz | 60 |
| Start Amps | 62 |
| Amps (Max) | 10.5 |
| Service Factor Amps | 10.5 |
| Full Load kW | 7.6 |
| Start KVA | 49.3 |
| Full Load KVA | 8.4 |
| NEC Code Letter | L |
| Service Factor | 1 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
3V50M4-53
| Hazardous Location | 3VX50M4-53 |
|---|---|
| Voltage | 575 |
| Phase | 3 |
| Hertz | 60 |
| Start Amps | 45 |
| Amps (Max) | 8.4 |
| Service Factor Amps | 8.4 |
| Full Load kW | 7.6 |
| Start KVA | 44.8 |
| Full Load KVA | 8.4 |
| NEC Code Letter | K |
| Service Factor | 1 |
| Capacities To | 400 GPM (25.24 LPS) |
| Heads To | 48' (14.6 m) |
| Solids Handling | 2-1/2" (63.5 mm) |
| Liquids Handling | Raw unscreened sewage, effluent, storm water |
| Intermittent Liquid Temp. | Up To 140°F (60°C) |
| Winding Insulation Temp Class F | 311°F (155°C) |
| Motor Electrical Data | 1750 RPM 1 – 5 HP, 230V, 1Ø, 60 Hz 1 – 5 HP, 200/230/460/575V, 3Ø, 60 Hz |
| Std. Third Party Approvals | CSA |
| Optional Approvals | FM Class 1, Groups C & D (3VX only) |
| Acceptable pH Range | 6-9 |
| Specific Gravity | .9 – 1.1 |
| Viscosity | 28 – 35 SSU |
| Discharge Flange Dia. | 3" (76 mm) |
| Motor Housing, Seal Housing, Cord Cap and Volute Case | Cast iron, Class 30, ASTM A48 |
| Enclosed 2-Vane Impeller | Ductile iron, Class 65, ASTM A536 |
| Power Cord | SOOW, W |
| Control Cord | SOOW |
| MECHANICAL SEAL OPTIONAL | Double tandem, type 21 carbon and ceramic lower tungsten, carbide |
| PUMP MOTOR SHAFT | 416 SST |
| FASTENERS | 300 series SST |
| Volute Wear Ring | Brass |
Specifications
| Brand | Myers |
|---|