Attributes
| Family Id | high_pressure_booster_pumps_mpb_series |
|---|---|
| Brand | Myers |
| Part Numbers | MPB Series, 7MPB50, 7MPB75, 7MPB100, 10MPB50, 10MPB75, 10MPB100, 10MPB150, 10MPB200, 20MPB100, 20MPB150, 20MPB200, 20MPB300, 30MPB100, 30MPB150, 30MPB200, 30MPB300 |
| Business Units | IFT – Commercial and Infrastructure Flow,IFT – Residential and Irrigation Flow |
| Applications | Consumer Water Supply Pumps, Booster Pumps |
| Discontinued | 0 |
Description
The MPB series serviceable high pressure booster pumps are the most durable booster pumps available. The floating impeller design minimizes thrust loads, allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic components.
- True back pull-out design allows impeller and bearing frame to be backed out of volute without disturbing plumbing or mounting fixture, saving time needed for preventive maintenance
- Precision fit impellers are designed to maximize hydraulic pressure and water delivery at each stage
- Staging system uses ceramic wear surface for superior wear and heat resistance that's tougher than steel
- Compact, lightweight design grabs first place for faster installation and improved economy
- Versatile mounting base is specially designed to be an easy fit on a wider variety of challenging applications
Variations (17)
MPB Series
| MAXIMUM DISCHARGE PRESSURE | 300 PSI (model 10MPB200) |
|---|---|
| MAXIMUM INLET PRESSURE | 80 PSI |
| MAXIMUM TOTAL PRESSURE | Pump Pressure + Inlet Pressure Not to Exceed 315 PSI |
| DISCHARGE SIZE | 3/4", 1", or 1-1/4" NPT (model dependent) |
| AMP DRAW full load | max of 26 Amps (2 HP running on 115v) |
| Voltage | 230v/115v or 230v, AC, 1-phase |
| MAXIMUM WATER TEMPERATURE | Prolonged use with liquids above 140 degrees F is not recommended |
| Discharge | Cast Iron |
| MOTOR ADAPTER & BASE | Cast Iron |
| Impeller | Acetal |
| DIFFUSER | Polycarbonate |
| Shaft | 304 Grade Stainless Steel |
| O-RINGS | Buna-N |
| MECHANICAL SEAL | Mechanical Seal - Carbon/Ceramic, Buna-N |
7MPB50
| GPM | 7 |
|---|---|
| Horsepower | 1/2 |
| Stages | 9 |
| MAXIMUM INLET PRESSURE | 80 PSI |
| MAXIMUM TOTAL PRESSURE | Pump Pressure + Inlet Pressure Not to Exceed 315 PSI |
| Voltage | 115/230 |
| MAXIMUM WATER TEMPERATURE | Prolonged use with liquids above 140° F is not recommended. |
| Discharge | Cast Iron |
| MOTOR ADAPTER & BASE | Cast Iron |
| Impeller | Acetal |
| DIFFUSER | Polycarbonate |
| Shaft | 300 series stainless steel |
| O-RINGS | Buna-N |
| MECHANICAL SEAL | Carbon/Ceramic, Buna-N |
7MPB75
| GPM | 7 |
|---|---|
| Horsepower | 3/4 |
| Stages | 12 |
7MPB100
| GPM | 7 |
|---|---|
| Horsepower | 1 |
| Stages | 16 |
10MPB50
| GPM | 10 |
|---|---|
| Horsepower | 1/2 |
| Stages | 6 |
10MPB75
| GPM | 10 |
|---|---|
| Horsepower | 3/4 |
| Stages | 8 |
10MPB100
| GPM | 10 |
|---|---|
| Horsepower | 1 |
| Stages | 10 |
10MPB150
| GPM | 10 |
|---|---|
| Horsepower | 1-1/2 |
| Stages | 14 |
10MPB200
| GPM | 10 |
|---|---|
| Horsepower | 2 |
| Stages | 16 |
| MAXIMUM DISCHARGE PRESSURE | 300 PSI |
20MPB100
| GPM | 20 |
|---|---|
| Horsepower | 1 |
| Stages | 7 |
20MPB150
| GPM | 20 |
|---|---|
| Horsepower | 1-1/2 |
| Stages | 9 |
20MPB200
| GPM | 20 |
|---|---|
| Horsepower | 2 |
| Stages | 11 |
20MPB300
| GPM | 20 |
|---|---|
| Horsepower | 3 |
| Stages | 15 |
30MPB100
| GPM | 30 |
|---|---|
| Horsepower | 1 |
| Stages | 5 |
30MPB150
| GPM | 30 |
|---|---|
| Horsepower | 1-1/2 |
| Stages | 6 |
30MPB200
| GPM | 30 |
|---|---|
| Horsepower | 2 |
| Stages | 7 |
30MPB300
| GPM | 30 |
|---|---|
| Horsepower | 3 |
| Stages | 11 |
Specifications
| Brand | Myers |
|---|