Attributes
| Family Id | qp_quick_prime_self-priming_centrifugal_pumps |
|---|---|
| Brand | Myers |
| Part Numbers | QP Series (3/4 thru 3 HP) - Myers, QP7, QP7-3, QP10, QP10-3, QP15, QP15-3, QP20, QP20-3, QP30, QP30-3 |
| Business Units | IFT – Commercial and Infrastructure Flow,IFT – Residential and Irrigation Flow |
| Applications | Consumer Water Supply Pumps, Centrifugal Pumps |
| Discontinued | 0 |
Description
The Quick Prime self-priming centrifugal pump is designed for demanding jobs where a lot of water is required over a long period of time. For lawn and garden sprinkling, car washing, or other big cleaning and maintenance jobs, it's built for one purpose only - continuous high performance service.
- Ruggedly built to meet the demands for long, hard continuous service without over-working or overloading the motor
- Manufactured to precise performance specifications
- Corrosion resistant impellers for long life
- Simple design for powerful, efficient operation and easy servicing
- Proper impeller alignment for smooth, quiet running
- Unique diffuser design provides quick automatic prime. No additional water needed for repriming after installation
- Common brackets, cases and gaskets on all sizes -- simplified parts selection
Variations (11)
QP Series (3/4 thru 3 HP) - Myers
| FLOW at 10-foot LIFT and 30 PSI | 3575 GPM (model QP15) |
|---|---|
| MAXIMUM TOTAL PRESSURE Inlet + Pump Pressure | QP7: 45 PSI / QP10: 46 PSI / QP15: 47 PSI / QP20: 49 PSI / QP30:50 PSI |
| MAXIMUM DISCHARGE PRESSURE | 52 PSI (model QP30) |
| AMP DRAW full load | Model, Voltage, and Phase Dependent |
| Voltage | 115V / 230V AC, 60 Hz (2 and 3 HP are 230 volt only) |
QP7
| Body Construction | High-Tensile Gray Iron |
|---|---|
| Horsepower | 3/4 |
| MAXIMUM CAPACITY | 40.75 |
| SUCTION SIZE | 1-1/2" NPT |
| DISCHARGE SIZE | 1-1/2" NPT |
| SHAFT SEAL | Carbon / Ceramic Mechanical Type |
QP7-3
| Body Construction | High-Tensile Gray Iron |
|---|---|
| Horsepower | 3/4 |
| MAXIMUM CAPACITY | 40.75 |
| SUCTION SIZE | 1-1/2" NPT |
| DISCHARGE SIZE | 1-1/2" NPT |
| SHAFT SEAL | Carbon / Ceramic Mechanical Type |
QP10
| Body Construction | High-Tensile Gray Iron |
|---|---|
| Horsepower | 1 |
| MAXIMUM CAPACITY | 51.2 |
| SUCTION SIZE | 1-1/2" NPT |
| DISCHARGE SIZE | 1-1/2" NPT |
| SHAFT SEAL | Carbon / Ceramic Mechanical Type |
QP10-3
| Body Construction | High-Tensile Gray Iron |
|---|---|
| Horsepower | 1 |
| MAXIMUM CAPACITY | 51.2 |
| SUCTION SIZE | 1-1/2" NPT |
| DISCHARGE SIZE | 1-1/2" NPT |
| SHAFT SEAL | Carbon / Ceramic Mechanical Type |
QP15
| Body Construction | High-Tensile Gray Iron |
|---|---|
| Horsepower | 1-1/2 |
| MAXIMUM CAPACITY | 71.6 |
| SUCTION SIZE | 1-1/2" NPT |
| DISCHARGE SIZE | 1-1/2" NPT |
| SHAFT SEAL | Carbon / Ceramic Mechanical Type |
QP15-3
| Body Construction | High-Tensile Gray Iron |
|---|---|
| Horsepower | 1-1/2 |
| MAXIMUM CAPACITY | 71.6 |
| SUCTION SIZE | 1-1/2" NPT |
| DISCHARGE SIZE | 1-1/2" NPT |
| SHAFT SEAL | Carbon / Ceramic Mechanical Type |
QP20
| Body Construction | High-Tensile Gray Iron |
|---|---|
| Horsepower | 2 |
| MAXIMUM CAPACITY | 78.9 |
| SUCTION SIZE | 1-1/2" NPT |
| DISCHARGE SIZE | 1-1/2" NPT |
| SHAFT SEAL | Carbon / Ceramic Mechanical Type |
QP20-3
| Body Construction | High-Tensile Gray Iron |
|---|---|
| Horsepower | 2 |
| MAXIMUM CAPACITY | 78.9 |
| SUCTION SIZE | 1-1/2" NPT |
| DISCHARGE SIZE | 1-1/2" NPT |
| SHAFT SEAL | Carbon / Ceramic Mechanical Type |
QP30
| Body Construction | High-Tensile Gray Iron |
|---|---|
| Horsepower | 3 |
| MAXIMUM CAPACITY | 93 |
| SUCTION SIZE | 1-1/2" NPT |
| DISCHARGE SIZE | 1-1/2" NPT |
| SHAFT SEAL | Carbon / Ceramic Mechanical Type |
QP30-3
| Body Construction | High-Tensile Gray Iron |
|---|---|
| Horsepower | 3 |
| MAXIMUM CAPACITY | 93 |
| SUCTION SIZE | 1-1/2" NPT |
| DISCHARGE SIZE | 1-1/2" NPT |
| SHAFT SEAL | Carbon / Ceramic Mechanical Type |
Specifications
| Brand | Myers |
|---|