Attributes
| Family Id | centrifugal_sprinkler_pumps_pqp_series |
|---|---|
| Brand | Myers |
| Part Numbers | PQP Series, PQP10, PQP15, PQP20, PQP25 |
| Business Units | IFT – Commercial and Infrastructure Flow,IFT – Residential and Irrigation Flow |
| Applications | Consumer Water Supply Pumps, Centrifugal Pumps |
| Discontinued | 0 |
Description
Quick priming PQP Series Pump feature lightweight construction in a self-priming design. These models offer a stronger pump body with reinforcement ribs and also a new 2" suction that is designed for the professional pump contractor.
- Fiberglass-reinforced polypropylene pump body and seal plate is lightweight, corrosion-resistant and exceptionally strong
- Drain port provided for easy winterizing
- Corrosion-resistant composite pump base
- Easy serviceable back pullout design
- 2-compartment, square flange motor with thermal overload protection
- Rapid priming once pump body is filled with water
Variations (5)
PQP Series
| MAXIMUM CAPACITY | 90 GPM (model PQP25) |
|---|---|
| FLOW at 10-foot LIFT and 30 PSI | 44 GPM (model PQP15) |
| MAX LIFT | 25' |
| MAXIMUM DISCHARGE PRESSURE | 60 PSI (model PQP25) |
| AMP DRAW full load | Model & Voltage Dependent |
| MAXIMUM WATER TEMPERATURE | 140 F (60 C) |
| BASE | High-impact composite, ABS |
| Seal Plate | Fiberglass-reinforced, Polypropylene |
| Impeller | Polycarbonate |
| DIFFUSER | Polycarbonate |
| Shaft | Stainless Steel |
| CLAMP | Stainless Steel |
PQP10
| Body Construction | Fiberglass-reinforced thermoplastic |
|---|---|
| Horsepower | 1 |
| MAXIMUM TOTAL PRESSURE Inlet + Pump Pressure | 105 PSI |
| SUCTION SIZE | 1-1/2" NPT |
| DISCHARGE SIZE | 1-1/2" NPT |
PQP15
| Body Construction | Fiberglass-reinforced thermoplastic |
|---|---|
| Horsepower | 1-1/2 |
| MAXIMUM TOTAL PRESSURE Inlet + Pump Pressure | 110 PSI |
| SUCTION SIZE | 1-1/2" NPT |
| DISCHARGE SIZE | 1-1/2" NPT |
PQP20
| Body Construction | Fiberglass-reinforced thermoplastic |
|---|---|
| Horsepower | 2 |
| MAXIMUM TOTAL PRESSURE Inlet + Pump Pressure | 120 PSI |
| SUCTION SIZE | 2" NPT |
| DISCHARGE SIZE | 2" NPT |
PQP25
| Body Construction | Fiberglass-reinforced thermoplastic |
|---|---|
| Horsepower | 2-1/2 |
| MAXIMUM TOTAL PRESSURE Inlet + Pump Pressure | 140 PSI |
| SUCTION SIZE | 2" NPT |
| DISCHARGE SIZE | 2" NPT |
Specifications
| Brand | Myers |
|---|