Attributes
| Family Id | pentair-hydromatic-spd-series-high-head-1-2-hp-effluent-pumps |
|---|---|
| Brand | Hydromatic |
| Part Numbers | SPD50H, SPD100H |
| Business Units | IFT – Commercial and Infrastructure Flow,IFT – Residential and Irrigation Flow |
| Applications | Effluent Pumps, Consumer Water Disposal Pumps |
| Discontinued | 0 |
Description
Specifically designed to meet the demands of septic tank effluent applications that require a "high-head" dual seal pump.
## KEY FEATURES
- Two (2) Carbon/Ceramic Type 21 Mechanical Seals Mounted in Tandem
- Oil-Filled Motor with Automatic Reset Thermal Overload for Maximum Protection (single-phase models)
- Upper & Lower Ball Bearing Construction
- Piggyback Plug Available for Easy Maintenance and Switch Replacement
- Optional Seal Failure Probe Warns of Seal Leak
- Capacitor Start for Increased Starting Torque (single-phase models)
### WARRANTY
12 months from date of purchase or 18 months from date of manufacture, whichever comes first.
Variations (2)
SPD50H
| Horsepower | 1/2 |
|---|
SPD100H
| Horsepower | 1 |
|---|
Specifications
| BODY CONSTRUCTION | Class 30 Cast Iron |
|---|---|
| HORSEPOWER | 1/2 HP |
| MAXIMUM HEAD | 50 ft. (15.2 m) |
| MAXIMUM CAPACITY | 112 GPM (7.1 LPS) |
| FLOW at 10' LIFT | 104 GPM |
| SWITCH TYPE | Diaphragm Pressure Switch |
| MINIMUM SUMP DIAMETER | Simplex: 24" / Duplex: 36" |
| DISCHARGE PIPE SIZE | 2" NPT (3" NPT optional) |
| MAXIMUM SOLIDS HANDLING SIZE | 3/4" |
| AMP DRAW (full load) | 14 amps on 115v / 7 amps on 230v 1-phase / 3.6 amps on 208v / 3.5 amps on 230v 3-phase / 1.8 amps on 460v / 1.9 amps on 575v |
| CORD LENGTH | 10' SJTW (20' optional) |
| VOLTAGE | Available in 115v or 208v 1-phase, OR 230v, 460v, or 575v 3-phase 60 Hz |
| MAXIMUM LIQUID TEMPERATURE | 140°F (60°C) |
| IMPELLER CONSTRUCTION | Class 30 Cast Iron, 2-vane |
| Brand | Hydromatic |