Attributes
| Family Id | pentair-hydromatic-spx-series-explosion-proof-effluent-pumps |
|---|---|
| Brand | Hydromatic |
| Business Units | IFT – Commercial and Infrastructure Flow,IFT – Residential and Irrigation Flow |
| Applications | Effluent Pumps, Consumer Water Disposal Pumps |
| Discontinued | 0 |
Description
Rugged, submersible, explosion-proof sump pumps for municipal, commercial and industrial use.
## KEY FEATURES
- Oil-Filled Motor for Maximum Heat Dissipation and Constant Bearing Lubrication
- Recessed Impeller Reduces Radial Bearing Loads, Increases Bearing Life
- High Torque Capacitor Start Single-Phase Motor for Assured Starting Under Heavy Load
- On-Winding Heat Sensors Will Stop Motor In Case of Overheating To Prevent Costly Motor Damage
- High-head version available
### WARRANTY
12 months from date of purchase or 18 months from date of manufacture, whichever comes first.
Specifications
| BODY CONSTRUCTION | Cast Iron |
|---|---|
| HORSEPOWER | 1/2 HP |
| MAXIMUM HEAD | SPX50: 36' / SPX50H: 36' |
| MAXIMUM CAPACITY | SPX50: 95 GPM / SPX50H: 73 GPM |
| FLOW at 10' LIFT | SPX50: 95 GPM / SPX50H: 68 GPM |
| SWITCH TYPE | Manual or Control Panel Req'd |
| DISCHARGE PIPE SIZE | SPX50 2" / NPTSPX50H 1-1/2" |
| MAXIMUM SOLIDS HANDLING SIZE | SPX50: 2" / SPX50H: 3/4" |
| AMP DRAW (full load) | 5.9 amps on 208v / 5.3 amps on 230v |
| CORD LENGTH | 20' Type SOW-A 14/4 |
| VOLTAGE | Available in 208v or 230v AC, 1-Phase |
| MAXIMUM LIQUID TEMPERATURE | 140°F (60°C) |
| MOTOR | 1/2 HP Capacitor Start / Induction Run |
| IMPELLER MATERIAL | Cast Iron |
| SHAFT MATERIAL | 416 Stainless Steel |
| SHAFT SEAL | Dual Carbon/Ceramic |
| Brand | Hydromatic |